User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 4- 23
Function Details
C-V Sweep Measurement
For your reference, select the parallel measurement mode (Lp-G, Lp-D, or anything)
for the high inductance measurements (100  or more of impedance), and select the
series measurement mode (Ls-Rs, or anything) for the low inductance
measurements (100
 or less of impedance). Because the reactance of high
inductance at a given frequency is relatively high (compared with that of a low
inductance), so the parallel resistance becomes more significant than the series
component.
Figure 4-12 Admittance and Parameter Calculation
In some case, the reciprocal of impedance (admittance) Y is used. Figure 4-12
shows the vector representation of admittance. As impedance Z, Y contains a real
and an imaginary part, and is expressed in rectangular form as conductance G and
susceptance B, or in polar form as magnitude of admittance |Y| and phase .
*M% _<_a7
_<_ *%


7 WDQ P

*
_%_
<
=

% J\I&
4 
'

*
_%_
<DGPLWDQFH6
*FRQGXFWDQFH6
%VXVFHSWDQFH6
7SKDVHGHJUHHRUUDGLDQ
IIUHTXHQF\+]
&FDSDFLWDQFH)
4TXDOLW\IDFWRU
'GLVVLSDWLRQIDFWRU
5SSDUDOOHOUHVLVWDQFH
5HDOSDUW
,PDJLQDU\SDUW
_<_
7
M%
*
*
5S
