User`s guide

4- 4 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Function Details
I/V Sweep Measurement
Output Range
Output range of the sweep source channel is automatically set to the following
range.
• minimum range covers all sweep output values in Linear sweep.
• minimum range covers all sweep output values in Log voltage sweep.
• optimum range for output value every sweep step in Log current sweep.
Basic Sweep Measurement
Basic sweep measurement uses the primary sweep source (VAR1). You can select
any combination of Direction and Linear/Log as shown in
Figure 4-2.
• Direction
• Single source channel sweeps the output from user specified start value to
stop value.
• Double source channel sweeps the output from user specified start value to
stop value, then from stop value to start value.
• Linear/Log
• Linear staircase
• Logarithmic staircase
Figure 4-2 Staircase Sweep Outputs
See “I/V Sweep” on page 2-4 for the GUI.