User`s guide

3- 18 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Application Test Definition
Test Contents
Program
Component
This component selection menu lists the program components available for the test
flow. See
“Program Component” on page 3-26.
Application Test This menu lists the application test setups available for the user. Inserting an
application test setup to the test flow displays the test setup screen almost same as
the
“Application Test” on page 1-29. You set the test condition on this screen.
Variables can be used for setting the test condition. To use a Numeric or Module
variable, enter the variable name to the entry field. To use a String variable, type an
equal sign (=) and enter the variable name (for example,
=VAR).
Clicking the Assign to external variables... button opens the External Variable Setup
dialog box. See
“External Variable Setup” on page 3-23.
Analysis This component selection menu lists the analysis functions available for the test
flow, and provides the following components.
• “Auto Analysis” on page 3-27
• “Display Data Setup” on page 3-31
• “Data Display Control” on page 3-30
Classic Test This component selection menu lists the classic test objects, I/V Sweep, Multi
Channel I/V Sweep, I/V List Sweep, I/V-t Sampling, C-V Sweep, SPGU Control
Switching Matrix Control, and Direct Control.
Inserting a classic test component to the test flow displays the test setup screen
almost same as the
“I/V Sweep” on page 2-4, “Multi Channel I/V Sweep” on page
2-9, “I/V List Sweep” on page 2-13, “I/V-t Sampling” on page 2-21, “C-V Sweep”
on page 2-26, “SPGU Control” on page 2-61, “Switching Matrix Control” on page
2-59, or “Direct Control” on page 2-30. You set the test condition on the screen.
Clicking the Assign to external variables... button opens the External Variable Setup
dialog box. See
“External Variable Setup” on page 3-23.
My Favorite Setup This component selection menu is used to select the My Favorite setup inserted to
the test flow. Specify the preset group, then select the setup.
If a tracer test setup is selected, it is converted to and inserted as a Multi Channel I/V
Sweep test setup. In this conversion process, the VAR1 dual polarity sweep setup
(Dual Polarity) is ignored. The setup of the positive sweep from start to stop is
converted, but the setup of the negative sweep from -start to -stop is not converted.