User`s guide

3- 6 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Application Test Definition
Test Specification
Test Parameters
Definition
The test parameters are defined in this area.
Background Specifies a bitmap file used for the background in the Test
Parameters area of the main screen.
Browse...: Opens a dialog box used to select a bitmap file.
Cancel: Returns to the default setting.
Name Test parameter name
Type Type of the test parameter, Numeric, Module, String, Vector, or
ALWaveform (SPGU ALWG output data)
Default Default value of the parameter
For the Numeric, Vector, or ALWaveform type parameter, this
field provides the button to open Numeric KeyPad at the right
side.
For the Vector type parameter, this field provides the button to
open the
“Define vector data (page 2-18)” dialog box at the left
side.
For the ALWaveform type parameter, this field provides the
button to open the
“Define ALWG Waveform Window (page
2-68)” at the left side.
Description Description of the parameter
Align Specifies the X origin of the entry field in the main screen Test
Parameters area. Check this box to set it to the left edge of the
entry field. Uncheck this box to set it to the left edge of the
parameter name placed to the left of the entry field.
X, Y Specifies the entry field position. (X, Y)=(0, 0) specifies the
upper left corner of the main screen Test Parameters area.
Downward and rightward are positive. See
“Layout...”.
Width Specifies the width of the entry field.
Ext Do not check usually. The entry field for the parameter is put on
the main screen.
If the parameter is minor and do not need changes frequently,
check the Ext check box. The entry field will be put on the
dialog box displayed by clicking the
“Extended Setup (page
1-30)” button.
Layout... Opens the “Define Layout (page 3-10)” dialog box.