User`s guide
Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 3- 3
Application Test Definition
Test Definition Window
Test Definition Window
The Test Definition window is opened by selecting the Define New Test... function
or the Open Definition of This Test... function of the Library menu, and is used to
create a test definition used in the application test mode.
The test definition consists of the elements shown in Figure 3-1. And the Test
Definition window provides the following three tabs for creating a test definition.
• “Test Specification”
The test specification contains test name, description, device parameters, and
test parameters. The parameters will be the variables used to pass the test
conditions to the test execution flow or test setup defined in the test contents.
• “Test Contents”
The test contents are the core of the test definition, and defines the local
variables, test execution flow, and test setup. You can define the test setup by
selecting application tests, classic tests, or My Favorite setup, and entering the
test conditions.
• “Test Output”
The test output setup is optional. If you need the test result output (test result
display and record) of the test definition, declare the variables (analysis
parameters) and define the display setup.
Figure 3-1 Test Definition
7HVW6SHFLILFDWLRQ
7HVW2XWSXW
7HVW&RQWHQWV
7HVWQDPH
7HVWGHVFULSWLRQ
9DULDEOHV
(QWU\ILHOGV
9DULDEOHV
7HVWUHVXOWGLVSOD\
/RFDOYDULDEOHV
7HVWH[HFXWLRQIORZ
7HVWVHWXS
'HYLFHSDUDPHWHUV
7HVWSDUDPHWHUV
;<JUDSK
'DWDOLVW
3DUDPHWHUGLVSOD\
&ODVVLFWHVW
$SSOLFDWLRQWHVW
0\)DYRULWHVHWXS
$QDO\VLVSDUDPHWHUV