User`s guide

2- 72 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Classic Test Definition
Define ALWG Waveform Window
Pattern Editor Defines the pattern data. The Pattern Editor provides two methods, graphic mode
and tabular mode, for defining the pattern data.
In the graphic mode, you can define the pattern data by using the mouse pointer and
GUIs on the graph (on the left side of the Pattern Editor).
In the tabular mode, you can define the pattern data by entering Time in seconds,
Level in V, and Switch 0 (pulse switch open) or 1 (pulse switch close) into the table
(on the right side of the Pattern Editor).
The Delta Time check box and the Delta Level check box are used to switch the data
expression in the table. If the box is not checked, the value will be an absolute value;
if the box is checked, the value will be the difference from the previous point.
The Pattern Editor provides the following buttons.
Undo Undoes the last action.
Redo Cancels the Undo operation.
Add a New Point Adds a point.
Delete a Point Deletes the highlighted point.
The Pattern Editor also provides the following functions in the menu displayed by
right-clicking the area.
Cancel Closes the menu.
Save Saves the pattern data.
Edit Displays the Edit menu.
Display Displays the Display menu.
If the Pattern Editor is opened with the column data, the following GUI will be
available.
Ref Ch. Specifies the channel or the pattern which contains the
reference point.
Ref Pt. Specifies the reference point by the index number (No. column
of table).
Delta T Displays the difference from the reference point. For time data.
Delta V Displays the difference from the reference point. For level data.