User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 69
Classic Test Definition
Define ALWG Waveform Window
Delete Deletes the column data highlighted in the Sequence
Editor area.
Move Moves the highlighted column to the left or the right.
Repeat Count Opens the Repeat Count dialog box used to set the repeat
count.
Sequence Editor Specifies the output channel, the output pattern, the repeat count of the pattern, and
the output sequence of patterns. These setup information create the arbitrary linear
waveform data.
Column No. Number for specifying the output sequence. The pattern will be
output in the order of this number.
Repeat Count Output repeat count for the pattern specified by the channel
field (e.g right field of the label “SPGU1:HV”). The repeat
count must be entered in this field.
channel 
(e.g SPGU1:HV) Output channel and its output pattern. The channel is specified
by the header (e.g SPGU1:HV) of this row. The pattern data
must be specified by this entry field. A pre-defined pattern can
be selected from the drop down menu in this field. The right
button opens the Waveform Pattern Editor.
This area provides the following buttons.
Insert Column Adds a column.
Delete Column Deletes the highlighted column.
To Left Move the highlighted column to the left.
To Right Move the highlighted column to the right.
This area also provides the following functions in the menu displayed by
right-clicking this area.
Cancel Closes the menu.
Insert Column Adds a column.
Delete Column Deletes the highlighted column.
Move Column Moves the highlighted column to the left or the right.
Repeat Count Opens the Repeat Count dialog box used to set the repeat count.
Edit Opens the Waveform Pattern Editor with the specified pattern
data (Pattern) or the specified column data (Column).