User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 57
Classic Test Definition
Advanced Setup Window for C-V Sweep
Advanced Setup Window for C-V Sweep
This window is opened by clicking the Advanced button on the C-V Sweep
Measurement Setup screen, and is used to set the following functions.
AC Level/DC Bias
Monitor Settings
This area defines the variables for the AC level data and the DC bias data monitored
by the CMU while the capacitance measurement is performed.
Unit CMU used for the measurement
AC Level Monitor
Name
Variable name of the AC level monitor data
DC Bias Monitor
Name
Variable name of the DC bias monitor data
Channel Settings This area sets the SMU series resistor and the SMU filter.
Unit SMU used for the measurement
VName Variable name of voltage output or measurement data
IName Variable name of current output or measurement data
Series R Series resistor NONE or 1MOHM. See “SMU Series Resistor”
on page 4-71.
SMU series resistor is not available for MCSMU, HCSMU, and
HVSMU.
SMU Filter SMU filter ON or OFF. See “SMU Filter” on page 4-70.
Wait Time Control This area sets the source output wait time and the measurement wait time of SMU.
See
“Wait Time” on page 4-68. The Output Wait sets the source output wait time.
The Measurement Wait sets the measurement wait time.
Factor Factor value. 0 to 10, 0.1 resolution. This is the N value shown
in
“Wait Time” on page 4-68.