User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 55

Classic Test Definition

Range Setup Window

This window is opened by clicking the Range button on the C-V Sweep

Measurement Setup screen, and is used to set the measurement ranging operation.

CMU Measurement

Range

This area sets the CMU measurement ranging operation.

Unit CMU used for the measurement

Mode Ranging mode, AUTO (auto ranging) or FIXED (fixed range).

If Mode=AUTO, the MFCMU automatically searches for and

measures at the range that provides the best resolution.

Mode=FIXED, the MFCMU measures at the range specified

by the Range field.

Range Measurement range. This field is effective when Mode=FIXED.

Available measurement ranges depend on the measurement

frequency setting. See

Table 2-3.

Table 2-3 Available Measurement Ranges

SMU Measurement

Range

This area sets the SMU measurement ranging operation.

For the measurement ranging function, see “SMU Ranging Mode” on page 4-55.

Unit SMU used for the measurement

Name Variable name for the measurement data

Mode Ranging mode, AUTO (auto ranging), LIMITED (limited auto

ranging), or FIXED (fixed range)

Range Range value. For auto ranging, ignore this field. For limited

auto ranging, the measurement channel never uses ranges less

than the specified range.

Frequency Available measurement ranges

 200 kHz 50 , 100 , 300 , 1 k, 3 k, 10 k, 30 k, 100 k, 300 k

 2 MHz 50 , 100 , 300 , 1 k, 3 k, 10 k, 30 k

 5 MHz 50 , 100 , 300 , 1 k, 3 k