User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 51

Classic Test Definition

Pulse Setup Window

This window is opened by clicking the Pulse button on the Multi Channel I/V

Sweep Measurement Setup screen, and is used to set the SMU pulse setup

parameters. For the SMU pulse setup parameters, see

“SMU Pulse” on page 4-62.

The followings are the setup parameters for pulse output.

Common The following parameters are common to the all pulse output channels.

Period Pulse period. Entering AUTO sets the optimum value

automatically.

Measurement

Delay Time

Delay time from the beginning of the pulse period to the

beginning of the measurement. Entering AUTO sets the

optimum value automatically so that the measurement is

completed when the transition from peak to base is started by

the pulse output channel which starts the transition at first.

Integration Time The following entry fields are available for setting the high speed ADC. High

resolution ADC is not available for this measurement.

Mode ADC operation mode, TIME or PLC

Factor Factor value. Factor value of “Integration Time” on page 4-65.

Pulse Averaging

Count

The following parameter sets the averaging of the pulsed measurement. The Count

value works with the Count value on the ADC and Integration Time Setup window.

The Count value is not effective for HRSMU, MPSMU, and HPSMU.

Count Number of pulsed measurements for averaging to get one

measurement data.

Pulse Channels The followings are the pulse setup parameters set to the pulse output channels

individually.

Unit SMU used for the pulse output

Name Variable name for the pulse voltage output data or the pulse

current output data