User`s guide

2- 50 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Classic Test Definition
ADC and Integration Time Setup Window
ADC and Integration Time Setup Window
This window is opened by clicking the ADC/Integ button on the I/V Sweep / Multi
Channel I/V Sweep / I/V List Sweep / I/V-t Sampling / C-V Sweep Measurement
Setup screen, and is used to set the A/D converter of the SMU measurement
channels.
A/D Converter This area selects the ADC type and enables/disables the auto zero function. See
“Integration Time” on page 4-65.
Unit SMU used for the measurement
Name Variable name for the measurement data
ADC ADC type, HR ADC (high resolution ADC) or HS ADC (high
speed ADC)
HR ADC is not available for MCSMU, HCSMU, and HVSMU.
Also it is not available for the measurements using SMU pulse.
Measurement Compliance Side only, or both Force and Compliance Sides
Force and Compliance Sides is not available for HRSMU,
MPSMU, and HPSMU.
Integration Time This area sets the ADC mode and its factor for each ADC type.
Mode ADC operation mode
AUTO, MANUAL, or PLC for High Resolution ADC
AUTO, MANUAL, PLC, or TIME for High Speed ADC
TIME or PLC for the measurements using SMU pulse.
Factor Factor value. Factor value of “Integration Time” on page 4-65.
Auto Zero Auto zero function ON or OFF. Only for the high resolution
ADC. See
“ADC Zero Function” on page 4-66.
Pulse Averaging
Count
This area sets the averaging of the pulsed measurement. Not effective for HRSMU,
MPSMU, and HPSMU. The Count value is automatically set to the same value as
the Count value on the Pulse Setup window for using multiple SMU pulse output
channels.
Count Number of pulsed measurements for averaging to get one
measurement data.