User`s guide

2- 46 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1

Classic Test Definition

Display Setup

This setup screen is displayed by clicking the Display Setup tab of the I/V Sweep /

Multi Channel I/V Sweep / I/V List Sweep / I/V-t Sampling / C-V Sweep / Direct

Control test setup screen or by checking the Define own Output Parameters box on

the Test Definition window, and is used to set the test result output.

X-Y Graph Selects the data to be displayed in the X-Y Graph Plot area. The X and Y1 to Y8

axes can be set.

Name Specifies the parameter for the axis.

Sharing Specifies the group for sharing the Y axis scale. Select from

Group 1, Group 2, Group 3, Group 4, or None (no grouping).

The Scale, Min, and Max values are shared by the Y axes in the

same group. The scale set by Run Time Auto Scale, Auto Scale,

Zoom in, and/or Zoom out are also shared.

If another layer on the Data Display window contains an X-Y

trace which has the same name for both its grouped Y

parameter and its X parameter, the scaling will also be shared

by this X-Y trace.

Scale Scale of the axis, Linear or Log

Min Minimum value of the axis

Max Maximum value of the axis

Add Adds a parameter (or axis).

Delete Deletes the parameter selected with the radio button on the left.

Up Moves the selected parameter upward.

Down Moves the selected parameter downward.

List Display,

Parameters

Selects the data displayed in the List Display area or the Parameters area of the Data

Display window. Up to 20 parameters can be set for each area.

parameter Specifies the parameter for the data output.

Add Adds a row for the parameter.

Delete Deletes the selected parameter. To select the parameter, use the

left radio button.