User`s guide

2- 42 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Classic Test Definition
Function Setup
Function Setup
This setup screen is displayed by clicking the Function Setup tab of the I/V Sweep /
Multi Channel I/V Sweep / I/V List Sweep / I/V-t Sampling / C-V Sweep / Direct
Control test setup screen, and is used to set the user function and the analysis
function.
Calculation of the function is automatically performed after measurement. And the
functions defined in the Display Setup screen will be displayed on the Data Display
window. The user functions are available for the X-Y Graph Plot, List Display, and
Parameters area. The analysis functions are available for the Parameters area.
Apply This button performs calculation of the definition in this screen. If this button is
clicked when the Data Display window associated with this test has been opened,
the display is also updated.
The associated Data Display window will be the Data Display window that displays
the last measurement data or that is recalled at last.
User Function,
Analysis Function
The User/Analysis Function area sets the user/analysis functions effective for the
test. Up to 20 functions can be set. The user function result is referable from the
other user function defined in the following lines. The analysis function result is
referable from the other analysis function defined in the following lines.
Name Function name
Unit Unit of the function
Definition Definition of the function. The following identifiers can be used.
• Variables for the measurement/output data used in this test
• Functions defined in the above lines
• Local variables passed from the application test that calls this
test as a component
• Built-in functions and global variables
• Read-out functions (not available for the user functions)
Also see Chapter 5, “Built-in Programming Tool.”
Add, Delete Adds a function, or deletes the selected function. To select the
function, use the left radio button.
Up, Down Moves the selected function upward or downward.