User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 33
Classic Test Definition
Direct Control
Measurement Setup
This setup screen is used to define GPIB commands for controlling the SMU and
CMU directly, and is used to set the SMU series resistor, the SMU filter, and the bias
hold function.
Advanced This button opens a window for setting the SMU series resistor, the SMU filter, and
the bias hold function. See
“Advanced Setup” on page 2-34.
Command Setup This area defines GPIB commands for controlling the SMU and CMU directly.
Command Select the command or function from the pull-down menu. See
“Command Setup” on page 2-36.
Arguments Enter the command parameter. To enter multiple parameters,
insert a comma (,) between parameters. Multiple spaces can be
inserted before and after the comma.
All parameters should be entered. If an optional parameter is
abbreviated, the initial value may be set, the last used value may
be reused, or no value may be set. The result is unique and
depends on the command. For a description of each command,
see Agilent B1500 Programming Guide.
The parameter can be a numeric variable or a numeric
expression with fundamental arithmetic operations.
In an application test definition, the parameter can be a numeric
type test parameters, device parameters, or Symbol.
If the internal variable is used, it must be used as a string
variable. For example, the variables must be entered as follows.
“%I1”, “%R1”, “%R2”
Ignore Check this box to comment out this command line.
Add Adds a row for the command setup.
Delete Deletes the selected command setup. To select a command
setup, use the radio button on the left.
Up Moves the selected command setup upward.
Down Moves the selected command setup downward.