User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 31
Classic Test Definition
Direct Control
Channel Setup
This setup screen is used to define the channel setups and the variables for the
channel output data, measurement data, time stamp data, and index data.
Channel Definition This area defines the channel setups and the variables for the channel output data
and the measurement data.
Unit Measurement resource used for the source output or
measurement
V Name Variable name of DC voltage output or measurement data
I Name Variable name of DC current output or measurement data
Add SMU Adds a row for the SMU channel setup.
Add CMU Adds a row for the CMU channel setup.
Add SPGU Adds a row for the SPGU channel setup.
Delete Deletes the selected channel setup. To select a channel setup,
use the radio button on the left.
Up Moves the selected channel setup upward.
Down Moves the selected channel setup downward.
Additional Data
Variables
This area defines the variables for the measurement data other than DC voltage and
DC current which can be defined in Channel Definition.
Unit Unit (SMU or CMU) used for the measurement
Type Type of measurement data. See Table 2-1.
Name Variable name of the measurement data
Add Adds a row for the measurement variable.
Delete Deletes the selected measurement variable. To select a variable,
use the radio button on the left.
Miscellaneous
Variables
This area defines the variables for the time stamp data and the index data.
Time Stamp Name Variable name of the time stamp. Time stamp data indicates
the time at which step measurement was started.
Index Name Variable name of the data index. Integer above 0 is returned.