User`s guide

2- 30 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Classic Test Definition
Direct Control
Direct Control
On the EasyEXPERT main screen, click the Classic Test tab and select the Direct
Control icon. The main screen displays the Direct Control test setup screen.
Direct Control test mode performs measurement by controlling measurement
resources, SMU, CMU, and SPGU directly. The instrument can be controlled by
using GPIB commands. For the GPIB commands, see Agilent B1500 Programming
Guide.
Available GPIB commands are listed in the Command pull-down menu on the
Measurement Setup screen. Other commands are not supported by the Direct
Control test.
Setup Name Sets the name of the test setup. The name is used to identify the test setup saved to a
My Favorite group (preset group). Enter a unique name that is distinct from other
setup.
The name is recorded in the test result data and is used to differentiate the data in the
test record list area.
Channel Setup This tab displays the Channel Setup screen. See “Channel Setup” on page 2-31.
Measurement
Setup
This tab displays the Measurement Setup screen. See “Measurement Setup” on page
2-33.
Function Setup This tab displays the Function Setup screen. See “Function Setup” on page 2-42.
If Agilent B2200A/B2201A/E5250A switching matrix is used, the CMU
measurement data should be compensated. To perform the compensation, define a
user function by using the
“compenReZ” and “compenImZ” functions or the
“compenReY” and “compenImY” functions.
Auto Analysis
Setup
This tab displays the Auto Analysis Setup screen. See “Auto Analysis Setup” on
page 2-43.
Display Setup This tab displays the Display Setup screen. See “Display Setup” on page 2-46.