User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 1- 3
Main GUI
To start EasyEXPERT, see “Start EasyEXPERT” on page 1-4 and “Workspace
Configurator” on page 1-5.
To perform application test setup, see “Application Test” on page 1-29.
To perform classic test setup, see “Classic Test Definition” on page 2-1.
To perform tracer test setup, see “Tracer Test” on page 1-31.
To perform quick test setup, see “Quick Test” on page 1-48.
To perform measurement, see “Main Screen” on page 1-11.
To display measurement data and perform data analysis, see “Data Display” on page
1-84.
To perform self-test or diagnosis, see “Configuration” on page 1-64.
To perform self-calibration, see “Calibration” on page 1-58.
To control Agilent B2200A/B2201A/E5250A switching matrix connection, see
“Switching Matrix Operation Panel” on page 1-81.
To set the standby channels and the standby mode, see “Standby Channel
Definition” on page 1-83.
To define your application test, see “Application Test Definition” on page 3-1.