User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 21

Classic Test Definition

I/V-t Sampling

On the EasyEXPERT main screen, click the Classic Test tab and select the I/V-t

Sampling icon. The main screen displays the I/V-t sampling test setup screen. For

details of the measurement mode, see

“I/V-t Sampling Measurement” on page 4-13.

Setup Name Used to set the name of test setup. The name must be the identification for the test

setup saved to a My Favorite group (preset group). Enter a unique name that is

distinct from other setup.

The name is recorded in the test result data and is used to differentiate the data in the

test record list area.

Channel Setup This tab displays the Channel Setup screen. See “Channel Setup” on page 2-22.

Measurement

Setup

This tab displays the Measurement Setup screen. See “Measurement Setup” on page

2-23.

Function Setup This tab displays the Function Setup screen. See “Function Setup” on page 2-42.

Auto Analysis

Setup

This tab displays the Auto Analysis Setup screen. See “Auto Analysis Setup” on

page 2-43.

Display Setup This tab displays the Display Setup screen. See “Display Setup” on page 2-46.

NOTE

If you set Interval < 0.002 s

Sampling mode must be linear. This setting is not permitted for the log sampling.

Also SPGU is not available.

The following conditions are automatically set to the all measurement channels.

And the all channels start measurement simultaneously. After the measurement,

they are returned to the previous conditions automatically.

• High speed A/D converter (ADC)

• Minimum measurement range that covers compliance value, fixed ranging

If the measurement time is expected to be longer than interval, the measurement

channels automatically adjust the number of averaging samples (ADC settings) to

keep the sampling interval. After the measurement, it is returned to the previous

setting automatically.