User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 13

Classic Test Definition

I/V List Sweep

On the EasyEXPERT main screen, click the Classic Test tab and select the I/V

Sweep icon. The main screen displays the I/V List sweep test setup screen.

I/V List Sweep measurement is similar to I/V Sweep measurement described in “I/V

Sweep Measurement” on page 4-3.

Changes from the I/V Sweep are listed below.

• VAR1/VAR2 step output values are set by using a vector data. Vector data from

a spreadsheet software, either tab separated or comma separated can be copied to

the Define vector data dialog box via the Windows clipboard. See

“Define

vector data” on page 2-18.

• All SMU installed in the B1500 can be set to VAR1.

• VAR1’ is not supported.

Setup Name Sets the name of the test setup. The name is used to identify the test setup saved to a

My Favorite group (preset group). Enter a unique name that is distinct from other

setup.

The name is recorded in the test result data and is used to differentiate the data in the

test record list area.

Channel Setup This tab displays the Channel Setup screen. See “Channel Setup” on page 2-5.

Measurement

Setup

This tab displays the Measurement Setup screen. See “Measurement Setup” on page

2-6.

Function Setup This tab displays the Function Setup screen. See “Function Setup” on page 2-42.

Auto Analysis

Setup

This tab displays the Auto Analysis Setup screen. See “Auto Analysis Setup” on

page 2-43.

Display Setup This tab displays the Display Setup screen. See “Display Setup” on page 2-46.