User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 2- 3
Classic Test Definition
To perform measurement, see “Main Screen” on page 1-11.
To display measurement data and perform data analysis, see “Data Display” on page
1-84.
To perform self-test or diagnosis, see “Configuration” on page 1-64.
To perform self-calibration, see “Calibration” on page 1-58.
NOTE If You Use GNDU (Ground Unit)
Keep to the following rule to use the ground unit.
1. Set Mode to COMMON.
2. Set Function to CONST.
3. Do not use the I Name assigned to the ground unit.
Missing any one will cause an execution error.