User`s guide

Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1 10-75

Error Message

MDM File Converter Execution Error

Error message:

10001 Reading XTR file was aborted.

Conversion was aborted because of XTR file read error.

10002 Reading ZTR file was aborted.

Conversion was aborted because of ZTR file read error.

10003 Writing MDM file was aborted.

Conversion was aborted because of MDM file write error.

10004 Writing log file was aborted.

Conversion was aborted because of log file write error.

10005 Invalid command option: A.

Specify the effective option. The option A is not valid.

10006 Invalid XTR or ZTR file: A.

Specify a proper XTR/ZTR file. The file A may be defective.

Warning message:

20001 Invalid element: A. Could not complete the conversion.

Cannot convert the data of the improper element A.

20002 Unsupported classic test: A.

Cannot convert the data of the classic test A other than I/V Sweep,

Multi Channel I/V Sweep, or C-V Sweep.

20003 Application test result data is not supported: A.

Cannot convert the application test result data.

20004 Could not convert test setup using different V/I mode for VAR1

channels.

Cannot convert the test result data including the setup using different

V/I mode for VAR1 channels in Multi Channel I/V Sweep classic test.

20005 Unsupported impedance model: A.

Cannot convert the data of the impedance model A.