User`s guide

10-66 Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1
Error Message
Agilent B1500 Self-test/Calibration Error
4615 IFIM gain measurement by I ADC failed.
4616 Calculation of IM correction data failed.
4617 Calculation of IF correction data failed.
4701 Non-feedback offset adjustment is failed.
NOTE Error codes 5501 to 5701 are for HCSMU.
5501 Digital H/W function test failed.
5502 CPLC access function test failed.
5503 FPGA access function test failed.
5505 Bus FPGA JTAG function test failed.
5506 Float FPGA JTAG function test failed.
5507 OPT I/F access function test failed.
5509 ADC access test failed.
5510 EEPROM access function test failed.
5513 Power AMP bias test is failed.
5551 V offset self-test is failed.
5552 V sense self-test is failed.
5553 HS VADC self-test is failed.
5554 V CMR DAC self-test is failed.
5555 I offset self-test is failed.
5556 V loop self-test is failed.
5557 I sense low self-test is failed.
5558 HS IADC self-test is failed.
5559 I CMR DAC self-test is failed.
5560 I sense high self-test is failed.
5561 Power supply test is failed.
5562 V switch test is failed.
5563 High force output relay test is failed.
5564 High sense output relay test is failed.