User`s guide

10-62 Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1
Error Message
Agilent B1500 Self-test/Calibration Error
3011 EEPROM CRC data of DAC skew calibration data is invalid.
3012 EEPROM CRC data of ADC skew calibration data is invalid.
3013 EEPROM CRC data of RSU calibration data is invalid.
3014 Invalid EEPROM type.
3400 WGFMU module is in TEST FAIL state.
3401 Digital H/W function test failed.
3402 CPLD access function test failed.
3403 FPGA configuration test failed.
3404 FPGA1 access function test failed.
3405 FPGA2 access function test failed.
3406 FPGA1 System Clock DCM function test failed.
3407 FPGA1 DAC Clock DCM function test failed.
3408 FPGA1 ADC Clock DCM function test failed.
3409 FPGA1 Memory Clock DCM function test failed.
3410 FPGA2 System Clock DCM function test failed.
3411 FPGA2 DAC Clock DCM function test failed.
3412 FPGA2 ADC Clock DCM function test failed.
3413 FPGA2 Memory Clock DCM function test failed.
3414 FPGA1, 2 communication I/F test failed.
3415 CONVEND interrupt function test failed.
3416 10 MHz clock test failed.
3417 FPGA SYNC SEL pin control function test failed.
3418 FPGA SYNC FB pin control function test failed.
3419 FPGA SYNC IN pin control function test failed.
3420 IDELAY function test failed.
3421 Channel 1 SDRAM access function test failed.
3422 Channel 2 SDRAM access function test failed.
3423 WGFMU EEPROM access function test failed.