User`s guide

Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1 10-29
Error Message
Agilent EasyEXPERT Operation Error
300041 SDA daemon failed to start model name inspection process. Path: A,
Arguments: B, Reason: C
300042 Model name inspection failed. Set VISA interface ID and GPIB address
correctly, or connect the GPIB cable properly. Reason:
A
300051 SDA daemon failed to start database recovery process.
Path:
A, Arguments: B, Reason: C
300052 Database recovery failed. Contact Agilent Technologies. Reason: A
300101 Error occurred during inspection for the specified EasyEXPERT
database. Path: A
See the log file <common data folder>\Agilent\EasyEXPERT\Daemon\
StaDaemon.log if needed.
300102 The specified EasyEXPERT database is broken. Initialize the database
or restore the normal database backup. Path:
A, Reason: B
300103 EasyEXPERT database backup file (.xdb) is broken. Cannot restore this
backup. Path: A
300104 Insufficient free space of HDD. Drive: A Present Free Space: B bytes
Required Free Space: C bytes
Retry the operation after increasing free space. Free space can be
increased by deleting unnecessary files, compressing folders, and so on.
300105 EasyEXPERT database is not in the specified drive A. Specify a folder
on the drive B where the EasyEXPERT database exists.
300106 The specified backup contains the EasyEXPERT database contents for
another revision. Specify the other backup. Contents: A
300107 The specified backup does not contain the file or folder needed to
restore the database. Specify the other backup. Contents: A
300108 The specified backup contains the database that is created by the
EasyEXPERT revision A. It cannot be supported by the present
revision. Specify the other backup.
300109 EasyEXPERT database backup extraction error. See the log file
<common data
folder>\Agilent\EasyEXPERT\Daemon\StaDaemon.log
if needed. Backup restoration is canceled, and the present
EasyEXPERT database remains the same.
300110 Folder delete error. Delete the folder in the following path manually.
Path: A