User`s guide

10-28 Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1
Error Message
Agilent EasyEXPERT Operation Error
171003 File I/O failed during compressed data export. Could not access
destination file. Specified file
is either unsupported or corrupt. Specify
a correct file for the export.
171004 Compression process or decompression process failed. Specified file is
either unsupported or corrupt
. Specify a correct file for the export or
import.
It may also be a program error.
200001 Select from the candidates. Specify the value from the choices for this
field.
200002 Input a numeric value. The value must be numeric. Enter a numeric
value.
200003 Number of grid data elements must be A or less.
200004 Data paste failed. Data format is unsupported or incorrect.
200005 Data paste failed. Data of size AB cannot be pasted to position C,D. It
must be pasted to a range of EF.
201001 Failed to load image data. File A may not be an image file.
202001 The name A already exists.
300001 SDA daemon is already running.
300002 SDA daemon configuration file is corrupt. Check the file <common
data folder>\Agilent\EasyEXPERT\Daemon\StaDaemon.log.
300003 Specify a correct folder for the EasyEXPERT database. Specified
folder not found.
300004 Moving of EasyEXPERT database failed. Refer to the detail message,
and retry after taking necessary measures.
300005 Another user is running EasyEXPERT. EasyEXPERT does not support
“switching user”.
300011 SDA daemon failed to start FLEX command service.
path: A, arguments: B, reason: C
300012 FLEX command service was stopped by SDA daemon. After closing
Agilent Connection Expert, launch Start EasyEXPERT or restart
B1500.
300021 SDA daemon failed to start SDA service.
path: A, arguments: B, reason: C
300031 SDA daemon failed to start SDA shell.
path: A, arguments: B, reason: C