User`s guide

Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1 10-27
Error Message
Agilent EasyEXPERT Operation Error
140012 There is no data for this read out function.
140013 Font size must be between A and B.
140014 Number of texts exceeds the limit. Maximum of A texts are allowed.
140015 Number of pointers exceeds the limit. Maximum of A pointers are
allowed.
140016 Invalid value included in data specified by the marker. Pointer could
not be added.
140017 Available number of decades for the log scale must be between A and
B.
140101 Scalar data A is not found. Calculation failed. Scalar data A does not
exist. Change the test definition so that the data is set before it is called.
140102 Vector data A is not found. Calculation failed. Vector data A does not
exist. Change the test definition so that the data is set before it is called.
140103 Invalid value (A) was specified for axis scale. Valid option(s): B
141001 Maximum A Data Display windows can be opened other than the base
window. Cannot open additional Data Display window because the
number of opened windows reaches the limit. Close an unnecessary
window to open a new window.
141002 Maximum A Base Data Display windows can be opened.
151001 Maximum A Data Display windows can be opened other than the base
window.
151002 Test execution mode cannot be changed during the test.
151003 Up to A data traces can be displayed in the Data Display window.
151004 Repeat Measurement Setup is not available when Data Record is OFF.
151005 Thermo-trigger list must be defined.
151006 Thermometer channel must be enabled.
161001 Number of test definition windows must be A or less.
170001 Archive process failed. Reason: A
171001 Data compression failed. Program error. Contact Agilent Technologies.
171002 Specify a correct file for the import. Specified file is either unsupported
or corrupt.