User`s guide

10-26 Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1
Error Message
Agilent EasyEXPERT Operation Error
133011 The specified GPIB address A is assigned to the B1500. Specify the
value assigned to the other equipment. Cannot control the B1500.
134001 Dialog box interface error occurred.
134002 The process failed to activate the message-box window. Restart Agilent
B1500. If the problem still occurs, contact your nearest Agilent
Technologies.
134003 Message-box is already registered in the system. Restart Agilent
B1500. If the problem still occurs, contact your nearest Agilent
Technologies.
134004 Message-box function is not available because it is unregistered.
Restart Agilent B1500. If the problem still occurs, contact your nearest
Agilent Technologies.
134005 The message-box configuration with no button information is invalid.
Define the message box properly.
135001 No value is entered in this field. Enter the appropriate value in this
field.
140001 Specified value range from A to B of the axis “C” is not valid. Specified
value is out of the range for the “C” axis. Enter the available value.
140002 Specified scale type “A” of the axis “B” is not valid. Set the scale type
to LINEAR or
LOG.
140003 Data for Auto Analysis is not found. Cannot find the data that satisfy
the automatic analysis condition. Specify the analysis condition
properly.
140004 Data Display Operation has not completed within specified time (A
seconds). Cannot complete the graph plot, automatic analysis, or data
display properly. Internal error.
140005 Invalid operation for the stream occurred. Internal error.
140006 Duplicate data name was found. Data name must be unique. data name:
A
140007 No printers installed.
140008 Operation for printing failed. Perform printer setup properly.
140009 Failed to evaluate the read out function “A”.
140010 Enable the X-Y Graph to use this read out function.
140011 Define the axis A to use this read out function.