User`s guide

Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1 10-21
Error Message
Agilent EasyEXPERT Operation Error
114107 Index file creation failed during automatic data export. Refer to the
detail message,
and retry after taking necessary measures.
114151 Specify the XML Style Sheet File Path in the Test Results Data Auto
Export dialog box.
114152 Change the XML Style Sheet File Path in the Test Results Data Auto
Export dialog box. Specified value contains an invalid character.
Specified path: A
115001 There is no working test setup. First preset the test setup.
115011 The application test A depends on an undefined application test B.
Import the application test B in advance.
115021 Test setup import operation failed. Probably the imported contents are
not a test setup.
115022 Test setup conversion failed. Setup A is not available for the tests that
use the model B.
115031 Failed to invoke A.
115032 Repeat execution was aborted.
115041 Standby state was changed to OFF due to high voltage related error.
115042 Standby state was automatically changed to OFF by the measurement
unit emergency reset.
116001 Connected model not supported by Desktop EasyEXPERT. Only model
A is supported. Connected model: B (address: C)
116002 B1500A/B1505A firmware revision A is not supported by this revision
of EasyEXPERT.
Only revisions B and later are supported.
116003 Invalid argument specified for /gpib. Specified argument: /gpib:A
Example
argument (valid): /gpib:gpib0::17
116004 Desktop EasyEXPERT does not support 4155/56 firmware revision A.
Update the firmware to the revision B or later.
117001 Enter another label for the switching matrix input port. A is already
used for another port.
117002 Do not use a colon (:) in the label for a switching matrix input port.
117003 Connect the switching matrix to use this function. To establish the
GPIB connection, set the GPIB address on the Configuration window’s
Switching Matrix tab, and click the Poll button.