User`s guide

Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1 10-19
Error Message
Agilent EasyEXPERT Operation Error
112102 Primary sweep source of C-V Sweep must be V mode.
112103 A does not support B mode.
113001 Category name length must be in range of A to B characters.
113002 Application test definition name cannot be an empty string.
113003 Application test definition of the same name is already existing. Test
definition: A Test categories: B
113011 Duplicate parameter name was found. Parameter name must be unique.
Parameter name: A
113012 Duplicate typical value A is assigned. Each typical value must be
unique for a numeric parameter.
113013 Symbol must not be an empty string.
113014 Symbol A is duplicated. Symbol must be unique for a numeric
parameter.
113015 Same value A is assigned to symbols B and C. Each symbol must have
unique value for a numeric parameter.
113016 Duplicate typical value A is assigned. Each typical value must be
unique for a string parameter.
113017 Empty string is not allowed for the symbol.
113018 Symbol A is used for another vector parameter. Specify a different
symbol.
113021 The type of evaluated value does not match the type of parameter A.
113022 Value for numeric parameter is out of range. Value must be in range.
Parameter name: A Parameter value: B Parameter range: from C to D
113023 Value for string parameter is not contained in the enumeration. Value
must be a member of the enumeration. Parameter
name: A, Parameter
value: B, Enumeration: C
113024 Value for module parameter is invalid or is not compliant to the
resource type of the parameter. Parameter name: A, Parameter
value: B
113025 Improper value specified for the vector parameter. The value must be
within the following range.

Restriction: A, Specified value: B, Effective range: C to D
113031 Test setup A depends on an undefined application test B. Please import
the application test B in advance.