User`s guide

Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1 10-17
Error Message
Agilent EasyEXPERT Operation Error
111035 No sequence is defined in the ALWG waveform data. Define one
column or more.
111036 Pattern is not defined in the ALWG waveform data for the output
channel A. Specify a pattern.
111037 ALWG waveform data contains an invalid pattern.
Name
of the invalid pattern: A
111038 ALWG waveform data memory overflow. Delete unnecessary columns
or points in a pattern, and increase free space.
Output
channel: A, Required space: B, Maximum space: C
112001 Output function must be constant for the unit (A) in common mode.
112002 Output function (A) must be assigned to any unit.
112003 Output function (A) cannot be assigned to multiple units (B and C).
112004 Pulse mode cannot be assigned to multiple SMUs (A and B).
112005 I/V mode of the primary sweep source and synchronous sweep source
must be the same.
112006 Duplicate channel data name was found. Channel data name must be
unique. Channel data name: A
112007 Duplicate channel unit assignment was found. Channel unit assignment
must be unique. Channel unit: A
112008 No channel unit was assigned. At least one channel unit must be
assigned.
112009 Function (A) can be used for a maximum of B channel(s) in the C mode.
112010 All SPGU channels must be set to the same output mode, VPULSE or
ALWG.
112011 SMU descriptor expression is expected. Expression: A
112012 CMU descriptor expression is expected. Expression: A
112013 SPGU descriptor expression must be entered. Expression: A
112014 Mode must be V or COMMON for VSU (A).
112015 VMU (A) must be defined as a constant current source.
112016 Mode must be COMMON for GNDU.
112022 No CMU was assigned. At least one CMU must be assigned.
112023 No SMU was assigned. At least one SMU must be assigned.