User`s manual

Agilent E8462A Relay Multiplexer Command Reference 77
DIAGnostic:SCAN:DELay
DIAGnostic:SCAN:DELay <card_number>, delay_time sets the amount of extra
time the module will wait between opening one channel and closing the next in a
scan operation.specified multiplexer module and returns the interrupt delay time.
Parameters
Comments •
Example Set the scan delay time for scanning operations.
DIAG:SCAN:DEL 2,.005
5 mS scan delay setting on card number 2.
DIAGnostic:SCAN:DELay?
DIAGnostic:SCAN:DELay? <card_number> queries the specified multiplexer
module and returns the delay time set between opening and closing during a scan.
Example Query the scan delay time setting.
DIAG:SCAN:DELay? 2
Query the scan delay time setting on card
number 2.
Name Type Range of Values Default
<card_number> numeric 1-99 1
<delay_time> numeric 0 seconds