User`s manual

72 Agilent E8462A Relay Multiplexer Command Reference
ARM
The ARM subsystem selects the number of scanning cycles (1 to 32767) for each
INITiate command.
Subsystem Syntax ARM
:COUNt <number> MIN|MAX
:COUNt? [MIN|MAX]
ARM:COUNT
ARM:COUNt <number> MIN|MAX Allows scanning cycles to occur a multiple of
times (1 to 32,767) with one
INITiate command when INITiate:CONTinuous OFF|0
is set.
MIN sets 1 cycle and MAX sets 32,767 cycles.
Parameters
Comments Number of Scans: Use only numeric values between 1 and 32767, MIN, or MAX for
the number of scanning cycles.
Related Commands:
ABORt, INITiate:IMMediate
*RST Condition: ARM:COUNt 1
Example Setting Ten Scanning Cycles
This example sets a multiplexer module for 10 scans of channels 10 through 17 in a
single-module switchbox.
ARM:COUN 10
10 scans per INIT command.
SCAN (@10010:10017)
Scan channels 10 to 17.
INIT
Start scan, close channel 10.
ARM:COUNt?
ARM:COUNt? [MIN|MAX] Returns the current number of scanning cycles set by
ARM:COUNt. The current number of scan cycles is returned when MIN or MAX is
not specified. With
MIN or MAX as a parameter, MIN returns 1 and MAX returns
32,767.
Parameter
Name
Parameter
Type Range of Values
Default
Value
number
numeric 1 thru 32,767|MIN|MAX 1