User`s manual

Configuring the Agilent E8462A Multiplexer 17
Installing the Multiplexer in a Mainframe
The Agilent E8462A may be installed in any slot (except slot 0) in a C-size
VXIbus mainframe. Refer to Figure 1-4 to install the Multiplexer in a
mainframe.
Figure 1-4. Installing the Multiplexer in a VXIbus Mainframe
NOTE: The extraction levers will not seat
the backplane connectors on older
VXIbus mainframes. You must manually
seat the connectors by pushing in the
module until the module’s front panel is
flush with the front of the mainframe. The
extraction levers may be used to guide
or remove the multiplexer.