User`s manual

148 Index
Command Quick Reference
Scanning Voltmeter, 122
Command Reference, 67
command types, 67
Commands
ARM subsystem, 72, 72, 72
CLEAR, 71, 81
DIAGnostic subsystem, 74
DISPlay subsystem, 78
GET (group execute trigger), 112
IEEE 488.2 common, 114
INITiate subsystem, 81, 81, 82, 82
linking other commands, 70
OUTPut subsystem, 83, 83, 84, 84, 85, 85, 86,
86
quick reference (SCPI), 122
ROUTe subsystem, 87, 87, 88, 90, 90, 92, 92,
94, 95, 95, 96, 97, 98, 99, 99, 100, 100
specifying SCPI, 29
STATus subsystem, 101, 103, 103, 103, 103,
104
SYSTem subsystem, 105, 105, 106,
106, 107
TRIGger subsystem, 110, 110, 110, 111, 111,
112, 112, 113
commands
common command format, 68
linking, 68
parameter types, 69
SCPI command format, 67
common (*) command
format, 68
Common (*) Commands
format, 67
linking with SCPI commands, 70
list of, 114
parameters, 67
Condition Register, 103
Conditions
detecting error, 53
reset, 35
Configuring, 11, 11, 11, 11, 11, 11, 11
Connecting
analog bus, 99
Connecting a Channel to the Analog Bus, 37
Connecting User Inputs, 18
Continuous Scanning Cycles, 81
Control Relays
closing, 89, 94, 99
switching, 99
Current Source Bus
tree relay channel, 120
D
Descriptions
register, 133
Detecting Error Conditions, 53
Device driver
SWITCH, 117
VOLTMTR, 117
DIAGnostic
FUSE?, 74
INTerrupt
TIME, 76
TIME?, 76
INTerrupt[:LINE], 75
INTerrupt[:LINE]?, 75
SCAN
DELay, 77
DELay?, 77
DIAGnostic Subsystem, 74
Disable
continuous scanning cycles, 81
ECL Trigger bus line, 83
Trig Out port, 84, 84
TTL Trigger bus line, 85
Disable/Enable Interrupts.Interrupts
disable/enable, 135
Discrete Command Parameters, 69
discrete parameters, 69
DISPlay Subsystem, 78
DISPlay:MONitor
:CARD, 78
:CARD?, 78
[:STATe], 79
[:STATe]?, 80
E
ECL Trigger
enabling and setting, 83, 111, 112
query state of, 84
scanning channels, 83
Enable
continuous scanning cycles, 81
ECL Trigger bus line, 83, 111, 112
register bits, 104
Trig Out port, 84, 84, 85
TTL Trigger bus line, 85, 111, 112