User`s manual

Register-Based Programming 133
Register Descriptions
The Multiplexer has 25 registers (refer to Table B-1). This section contains
a description of each register. Undefined register bits appear as "1" when the
register is read, and have no effect when written to.
You can write to the writable (W) registers and read from the readable (R)
registers which are listed in Table B-1.
Table B-1. Agilent E8462A 256-Channel Multiplexer Registers
Register Addr. Offset R/W Register Description (Register Address)
ID Register 00
h
R MFG ID Register (Base + 00
h
)
Device Type Register 02
h
R Device Type Register (Base + 02
h
)
Status/Control Register 04
h
R/W Status/Control Register (Base + 04
h
)
Relay Control Register 0 20
h
R/W Bank 0 Channels (CH 000 - 015, 032 - 047) (Base + 20
h
)
Relay Control Register 1 22
h
R/W Bank 1 Channels (CH 016 - 031, 048 - 063) (Base + 22
h
)
Relay Control Register 2 24
h
R/W Bank 2 Channels (CH 064 - 079, 096 - 111) (Base + 24
h
)
Relay Control Register 3 26
h
R/W Bank 3 Channels (CH 080 - 095, 112 - 127) (Base + 26
h
)
Relay Control Register 4 28
h
R/W Bank 4 Channels (CH 128 - 143, 160 - 175) (Base + 28
h
)
Relay Control Register 5 2A
h
R/W Bank 5 Channels (CH 144 - 159, 176 - 191) (Base + 2A
h
)
Relay Control Register 6 2C
h
R/W Bank 6 Channels (CH 192 - 207, 224 - 239) (Base + 2C
h
)
Relay Control Register 7 2E
h
R/W Bank 7 Channels (CH 208 - 223, 240 - 255) (Base + 2E
h
)
Tree Relay Control Register 0 30
h
R/W Tree Relays T1-T15 (CH 9000 - 9015) (Base + 30
h
)
Tree Relay Control Register 1 32
h
R/W Tree Relays T16-T21, C Relays C100-C108
(CH 9016 - 9021, 9100 - 9108) (Base + 32
h
)
Analog Bus Relay Control Register 34
h
R/W Analog Bus Relays AB200-AB204 (CH 9200 - 9204) (Base + 34
h
)
Timer Configuration Register 36
h
R/W Relay Settling Time (Base + 36
h
)