Technical data

3-38 Agilent E7501A Getting Started
Using SCPI Interfaces
Using the E7501A SCPI Interface
Logging Function
The Logging function is available in both the E7501A SCPI assistant and the
E7501A SCPI interface; the procedure for using the Logging function is the
same from both interfaces.
Enabling logging allows you to log Commands Sent, Query Responses, or
both. All log entries can be saved in a text file (*.log) using the name and
directory of your choice.
(For further information on the Logging function, refer to page 3-25.)
11. Start the external programming application software being used (such as
VEE or C++). For further information, refer to “Examples Using HPBW
and VXI-11” on page 3-39.
12. Send/Type the desired E7501A SCPI commands between the external
programming application software, through the enabled connection, to
the Agilent E7501A arbitrary analog signal development system.
(For a complete list of available SCPI commands, refer to E7501A SCPI
Commands in the Online Help.)