Technical data

Agilent E7501A Getting Started 3-35
Using SCPI Interfaces
Using the E7501A SCPI Interface
NOTE You must open an E7501A SCPI Interface before running any application
software (such as VEE or C++).
6. Start the E7501A SCPI Interface.
Click the Start menu,
point to Programs,
point to Agilent Signal Studio,
point to E7501A Signal Development System,
point to and click E7501A SCPI Interface.
7. Select the configuration that you would like to use:
Agilent E7501A or Demo. The Agilent E7501A configuration requires
system hardware while the Demo configuration is used for operating
without system hardware.
8. Select the VXI-11 Enable checkbox.
9. Select the OK button.