Technical data

Agilent E7501A Getting Started 3-33
Using SCPI Interfaces
Using the E7501A SCPI Interface
NOTE You must activate the LAN Server if you wish to communicate with the
Agilent E7501A arbitrary analog signal development system from a remote
computer using SCPI through a VXI-11 connection.
If not using a remote computer, the LAN Server does not need to be
activated.
If you wish to communicate using SCPI through Telnet, Sockets, or RS-232,
the LAN Server does not need to be configured.
5. Activate the LAN Server.
Click the Start menu,
point to Programs,
point to Agilent IO Libraries,
point to and click LAN Server.