Technical data

Agilent E7501A Getting Started 3-25
Using SCPI Interfaces
Using the E7501A SCPI Assistant
Logging Function
The Logging function is available in both the E7501A SCPI assistant and the
E7501A SCPI interface; the procedure for using the Logging function is the
same from both interfaces.
Enabling logging allows you to log Commands Sent, Query Responses, or
both. All log entries can be saved in a text file (*.log) using the name and
directory of your choice.
To start the Logging function
1. Click the Logging button ( ) available from the bottom of
the E7501A SCPI assistant.
The SCPI Assistant Logging dialog box should appear.
2. Click the Enable Logging checkbox and select the OK button.
Logging is disabled by default.
To specify a log file that is different from the default filename
1. Use the Browse button to open a browser and select a directory path.
2. Enter the name of the log file you wish to use in the Log File Name
entry box. By default, the log file is stored in the same directory where
the Agilent E7501A arbitrary analog signal developer software is
installed.