Technical data

Agilent E7501A Getting Started 1-19
Installation and Configuration
Step 4. Configuring Hardware/Software Assets
(Optional) Removing a
Hardware/Software
Asset
When the Configuration view is selected, the left-hand window pane is a tree
view of available assets. The right-hand window pane shows information
related to a selected asset.
1. Select the general category (asset role) that an asset is to be removed
from by clicking the plus sign.
2. Select an asset to remove from the list that is exposed.
3. Click the Delete Asset icon ( ).
NOTE There is no Undo for this action. To get a deleted asset back into a
configuration, refer to the section titled, “(Optional) Adding a
Hardware/SoftwareAsset”onpage1-17.
If you delete a configuration (such as Agilent E7501A or Demo), the fastest
way to restore them is to re-install the Agilent E7501A arbitrary analog
signal development system software. (For details on installation, refer to
“Step 3. Installing the Agilent E7501A Software” on page 1-7.)
Exiting Configuration To exit Configuration, select a different view.