Technical data

1-12 Agilent E7501A Getting Started
Installation and Configuration
Step 4. Configuring Hardware/Software Assets
Selecting a
Configuration
Select either the Agilent E7501A or Demo configuration.
If you select the Agilent E7501A as the Current Configuration,
you must configure a Stimulus Server with a minimum of
one RF Source and zero or more Modulation Sources.
If you do not have any hardware assets connected to the computer that is
running this software, you can set the
Current Configuration to
Demo.
This selects a simulation asset for each role used by the Stimulus Server.
If you have purchased other servers with your system, they will show on
the available list and can be selected as the
Current Configuration.
NOTE Each time changes are made to an asset in the selected configuration, the
software must be restarted before the changes take effect.