Installation guide

Connecting ParBERT to the LAN Configuring ParBERT for LAN
94 Agilent 81250 ParBERT Installation Guide, February 2002
5 Open the Protocols page.
Figure 63 Network dialog box opened to Protocols page
6 Click Properties.
The Microsoft TCP/IP Properties dialog box opens with the
IP Address page on top.
Figure 64 Microsoft TCP/IP Properties dialog box
7 Enter the IP Address, Subnet Mask and Default Gateway.
8 Click OK to close all remaining setup windows.
<your_IP_addr>
<your_subnet>
<your_Gateway>