Installation guide

Connecting ParBERT to the LAN Factory Default Settings
92 Agilent 81250 ParBERT Installation Guide, February 2002
Factory Default Settings
Before you get started, contact your network administrator for the
necessary network information. The factory defaults are shown in the
following table:
Configuring ParBERT for LAN
When you have collected all the data, follow the following steps:
1 Click Start, point to Settings, and then click Control Panel.
The Control Panel window opens.
Figure 60 Windows NT Control Panel
Table 7 Embedded PC default settings
Network parameter Factory default
Computer name E9850A-SNxxx
Work group – empty –
IP Address 192.0.0.1
Subnet mask 255.255.255.0
Default gateway none
Domain standalone