Installation guide

Agilent 81250 ParBERT Installation Guide, February 2002 91
Connecting ParBERT to the LAN
This chapter describes the work necessary to connect the embedded PC
to the LAN.
NOTE For instructions on how to connect an external PC to the LAN, please
see the user documentation that came with the external PC. If you need
additional information, it is recommended that you contact your network
administrator.
NOTE You need administrator privileges to connect the embedded PC to the
LAN. See ”Logging on as the Administrator” on page 71 for
instructions.
Windows NT 4.0 installed in ParBERT’s embedded PC supports the
following network protocols:
•TCP/IP
•NetBIOS
NOTE This section describes the installation steps for the TCP/IP network
protocol. If your network uses the NetBIOS protocol, contact your
network administrator for assistance.