Installation guide

Document History About this Guide
Agilent 81250 ParBERT Installation Guide, February 2002 9
Connecting ParBERT to the LAN ParBERT can be set up and used as a stand-alone instrument. But
connecting its controller to the LAN allows you to operate it from almost
any workstation. This chapter describes the necessary steps under
Windows NT.
Troubleshooting the ParBERT
Installation
Generally, ParBERT is delivered ready-to-use. But if you have installed a
multi-mainframe system or changed an existing system, you may run into
problems that can be avoided. This chapter deals with such problems.
Document History
All editions and updates of this manual and their creation date are listed
below. The first edition of the manual is Edition 1. The edition number
increments by 1 whenever the manual is revised. New editions are
complete revisions of the guide reflecting alterations in the functionality
of the instrument. Updates are occasionally made to the guide between
editions.
• Edition 1, July 2000, related to Agilent E4875A Software Release 1.0
and higher.
• Edition 1.1, March 2001. Update to cope with added functionality,
related to Agilent E4875A Software Release 3.0 and higher.
• Edition 1.2, April 2001. Update with special focus on clockgroups and
their implementation.
• Edition 2, October 2001. Installation of ParBERT 43G systems added.
Enhanced Agilent 81250 Configuration Tool and user interface
configuration. Related to Agilent E4875A Software Release 4.0 and
higher.
• Edition 2.1, February 2002. Update with special focus on replacement
instructions of 3.35 Gbit/s. frontends. Updated software start
procedure (Agilent 81250 Configuration Tool). Related to Agilent
E4875A Software Release 4.2 and higher