Installation guide

Starting ParBERT for the First Time Configuring ParBERT
82 Agilent 81250 ParBERT Installation Guide, February 2002
NOTE You need to run Build Systems after any changes in the hardware.
You do not need to run Build Systems if you are upgrading the user
software version without changing hardware.
After any changes of the system configuration you have to adjust the
instrument connectors. See the online Help, How to Adjust the
Instrument Connectors for instructions.
NOTE The Configuration Tool also creates for each real system an offline
system and additionally some demo systems.
An offline system reflects the actual system configuration. As it does not
access the hardware, it can be operated on any PC and used for training
purposes.
The demo systems provide simple system configurations and can be used
for demonstrating ParBERT features to newcomers.
How to Check the Serial Numbers
The Serial Numbers page of the Configuration Tool can be used to query
and archive the serial numbers of the installed modules and frontends.
Figure 52 Serial and ID Numbers of the Master Clock Module
By default, the numbers of the master clock module are displayed.