Installation guide

Configuring ParBERT Starting ParBERT for the First Time
Agilent 81250 ParBERT Installation Guide, February 2002 77
For existing installations, you can open this window by double-clicking
the Agilent 81250 Config icon on the Windows desktop, or by selecting
Agilent Digital Verification Tools -> Config in the Start menu.
The Configuration Tool appears as shown in Figure 47.
Figure 47 Agilent 81250 Configuration Tool Startup Settings Page
How to Select the Start-Up Settings
The start-up settings depend on the ParBERT configuration. For normal
applications, the ParBERT features three convenient operating modes:
Local, Controlled and Remote. When you select one of these modes, the
recommended programs required for that mode are automatically
selected to be started every time ParBERT is started.
Selecting the Operating Mode
Depending on which configuration you have, you need to make the
following settings:
Table 6 Configuring the Operation Mode
User interface running on ... Controller PC User PC
a) embedded or external controller Local n/a
b) remote PC, connected via LAN Controlled Remote