Service manual

52 Chapter 2
Troubleshooting
Perform Measurement System Verification
5. Before the program starts to initialize, the ‘E5022 VEE START’ will appear, select the
‘Restore from file’.
Figure 2-28 Selecting at the Start Menu
6. Select the file
verification.cf0 (if you use the E5040A as a spectrum analyzer in your
system) or
verification4395a.cf0 (if you use the 4395A as a spectrum analyzer in the
your system). This setting forces the system not to initialize the spinstand.
Figure 2-29 Selecting the Setup File (when you use the E5040A in the system)
7. Initialization takes about 30 seconds for the program to initialize.
8. After initialization, the ‘Cassette Parameter Setup’ menu will pop up. Click
Close.