Service manual

Chapter 2 41
Troubleshooting
Perform Measurement System Verification
1. Chapter Title
2. Troubleshooting
3. Chapter Title
4. Chapter Title
5. Chapter Title
spinstand crash.
NOTE [system installation folder] should be the folder you installed the system software. The
default installation folder is “C:\Program Files\Agilent\E5022.”
3. Select
Start - Programs - Agilent Hard Disk ReadWrite Test System - Test
Environment (Run Time Version)
from the Windows task bar to start the Test
Environment VEE program.
4. Before the program starts to initialize, the ‘E5022 VEE START’ dialog box will appear,
select the ‘Restore from file.’
Figure 2-11 Selecting at the Start Menu
5. Select the file
verification.cf0 (if you use the E5040A as a spectrum analyzer in your
system) or
verification4395a.cf0 (if you use the 4395A as a spectrum analyzer in the
your system). This setting forces the system not to initialize the spinstand.
Table 2-8 Verification Kit Setup Files and Folders
Setup File Name Folder
e5023-66510_bd.xml
[system installation folder]
\config\headamp\
e5023-66510_cal.xml
e5023-66510_ctrl.xml
e5023-66510_ic.xml
verification.cf0
[system installation folder]
\vee\
verification.cf1
verification4395a.cf0
verification4395a.cf1