Service manual

180 Appendix D
Error Messages
Error Messages on PC Monitor Display
hpe5022_ERROR_RESET Unable to reset on some
components (instruments
and the spinstand).
hpe5022_ERROR_SERCH_TRACK_FAILED Detected an error and failed
the operation in searching
the track.
hpe5022_ERROR_SEG_COMPLETE Segment is already
completed in UDS. Check
your program.
hpe5022_ERROR_SEG_IN_EDIT Segment is not completed in
UDS. Check your program.
hpe5022_ERROR_SELFTEST Unable to perform selftest
on some components
(instruments and the
spinstand)
hpe5022_ERROR_SEQ_COMPLETE Sequence is already
completed in UDS. Check
your program.
hpe5022_ERROR_SEQ_IN_EDIT Sequence is not completed
in UDS. Check your
program
hpe5022_ERROR_SEQ_NOT_SETUP Sequence is not set-up in
UDS. Check your program.
hpe5022_ERROR_SHROUD_OPEN The shroud cover is open.
Close the shroud cover
when the drive is on.
hpe5022_ERROR_SPINSTAND_SPECIFIC Detected the spinstand
specific errors.
hpe5022_ERROR_STAGE_INHIBIT_POS The target position of a head
is set in the inhibit area on
the media.
hpe5022_ERROR_THRESHOLD_NOT_FOUND The threshold level is not
found for PW measurement
or OTC calculation.
hpe5022_ERROR_THERMAL_ASPERITY Thermal Asperity Detected.
Check the head and media.
This error occurs when the
overflow is detected but the
average of measurement is
under the limit.
Error Messages on PC Monitor Display
Error Code Description